KHC Power Technology Co.,Ltd
To becoming a world-leading supplier of integrated solutions for power supply.
Add to Cart
1W isolated DC-DC converter Fixed input voltage, regulated dual output
Description
E_LT-1WR3&F_LT-1WR3 series are specially designed for applications where an isolated(two isolated)voltage is required in a distributed power supply system.They are suitable for:pure digital circuits,low frequency analog circuits,relay-driven circuits and data switching circuits.
FEATURES
Specifications
| Selection Guide | ||||||
|
Certification |
Part No. | Input Voltage (VDC) | Output | Full Load Efficiency (%) Min./Typ. | Capacitive Load(µF) Max. | |
| Nominal (Range) | Voltage (VDC) | Current(mA) Max./Min. | ||||
|
-- | E1215LT-1WR3 |
12 (10.8-13.2) | ±15 | ±33/±3 | 79/83 | 220 |
| F1205LT-1WR3 | 5 | 200/20 | 78/82 | 2400 | ||
| F1212LT-1WR3 | 12 | 84/9 | 79/83 | 560 | ||
| F1215LT-1WR3 | 15 | 67/7 | 79/83 | 560 | ||
| F2405LT-1WR3 | 24 (21.6-26.4) | 5 | 200/20 | 74/80 | 2400 | |
| F2415LT-1WR3 | 15 | 67/7 | 74/80 | 560 | ||
| Input Specifications | |||||
| Item | Operating Conditions | Min. | Typ. | Max. | Unit |
| Input Current (full load / no-load) | 12VDC input | -- | 102/8 | 107/-- |
mA |
| 24VDC input | -- | 53/8 | 57/-- | ||
| Reflected Ripple Current* | -- | 15 | -- | ||
|
Surge Voltage (1sec. max.) | 12VDC input | -0.7 | -- | 18 |
VDC |
| 24VDC input | -0.7 | -- | 30 | ||
| Input Filter | Capacitance filter | ||||
| Hot Plug | Unavailable | ||||
| Note: * Reflected ripple current testing method please see DC-DC Converter Application Notes for specific operation. | |||||
| Output Specifications | ||||||
| Item | Operating Conditions | Min. | Typ. | Max. | Unit | |
| Voltage Accuracy | See output regulation curve(Fig. 1) | |||||
| Linear Regulation | Input voltage change: ±1% | -- | -- | ±1.2 | -- | |
|
Load Regulation |
10%-100% load | 5VDC output | -- | 5 | 15 |
% |
| 12VDC/15VDC output | -- | 2 | 10 | |||
| Ripple & Noise* | 20MHz bandwidth | --- | 50 | 100 | mVp-p | |
| Temperature Coefficient | Full load | -- | ±0.02 | -- | %/℃ | |
| Short-circuit Protection | Continuous, self-recovery | |||||
| Note: * The “parallel cable” method is used for ripple and noise test, please refer to DC-DC Converter Application Notes for specific information. | ||||||
| Mechanical Specifications | |
| Case Material | Black plastic; flame-retardant and heat-resistant (UL94-V0) |
| Dimensions | 15.24 x 11.40 x 7.25 mm |
| Weight | 1.3g(Typ.) |
| Cooling Method | Free air convection |
