KHC Power Technology Co.,Ltd
To becoming a world-leading supplier of integrated solutions for power supply.
Add to Cart
1W DC DC converter Fixed input voltage, isolated & unregulated dual output
Description
A_XT-1WR2 series are specially designed for applications where an isolated voltage is required in a distributed power supply system.They are suitable for
1. Where the voltage of the input power supply is stable(voltage variation:±10%Vin);
2. Where isolation between input and output is necessary (isolation voltage≤1500VDC);
3. Where the output voltage regulation is not strictly required;
4. Typical application:preceding-stage interference isolation condition;ground-interference canceled condition;digit circuit condition; Voltage-isolation converting condition;normal low-frequency artificial circuit condition;relay drive circuit condition,etc.
FEATURES
Specifications
| Selection Guide | ||||||
|
Certification |
Part No. | Input Voltage (VDC) | Output | Efficiency (%,Min./Typ.) @ Full Load | Max. Capacitive Load (µF) | |
| Nominal (Range) | Output Voltage (VDC) | Output Current (mA)(Max./Min.) | ||||
|
CE | A0305XT-1WR2 |
3.3 (2.97-3.63) | ±5 | ±100/±10 | 72/76 |
100 |
| A0312XT-1WR2 | ±12 | ±42/±5 | 73/77 | |||
| A0315XT-1WR2 | ±15 | ±33/±3 | 74/78 | |||
|
UL/CE/CB | A0505XT-1WR2 |
5 (4.5-5.5) | ±5 | ±100/±10 | 76/80 | |
| A0509XT-1WR2 | ±9 | ±56/±6 | 76/80 | |||
| A0512XT-1WR2 | ±12 | ±42/±5 | 75/79 | |||
| A0515XT-1WR2 | ±15 | ±33/±3 | 77/81 | |||
| A0524XT-1WR2 | ±24 | ±21/±2 | 77/81 | |||
| A1205XT-1WR2 |
12 (10.8-13.2) | ±5 | ±100/±10 | 76/80 | ||
| A1209XT-1WR2 | ±9 | ±56/±6 | 76/80 | |||
| A1212XT-1WR2 | ±12 | ±42/±5 | 77/81 | |||
| A1215XT-1WR2 | ±15 | ±33/±3 | 77/81 | |||
| A1224XT-1WR2 | ±24 | ±21/±2 | 77/81 | |||
| CE | A1515XT-1WR2 | 15 (13.5-16.5) | ±15 | ±33/±3 | 77/81 | |
|
UL/CE/CB | A2405XT-1WR2 |
24 (21.6-26.4) | ±5 | ±100/±10 | 76/80 | |
| A2409XT-1WR2 | ±9 | ±56/±6 | 76/80 | |||
| A2412XT-1WR2 | ±12 | ±42/±5 | 77/81 | |||
| A2415XT-1WR2 | ±15 | ±33/±3 | 78/82 | |||
| A2424XT-1WR2 | ±24 | ±21/±2 | 74/80 | |||
| Note: *The capacitive loads of positive and negative outputs are identical. | ||||||
| Reflected Ripple Current | -- | 15 | -- | mA | |
|
Surge Voltage (1sec. max.) | 3.3V input | -0.7 | -- | 5 |
VDC |
| 5V input | -0.7 | -- | 9 | ||
| 12V input | -0.7 | -- | 18 | ||
| 15V input | -0.7 | -- | 21 | ||
| 24V input | -0.7 | -- | 30 | ||
| Input Filter | Filter capacitor | ||||
| Hot Plug | Unavailable | ||||
| Input Specifications | |||||
| Item | Operating Conditions | Min. | Typ. | Max. | Unit |
|
Input Current (full load / no-load) | 3.3V input | -- | 389/25 | --/70 |
mA |
| 5V input | -- | 250/20 | --/60 | ||
| 12V input | -- | 104/15 | --/50 | ||
| 15V input | -- | 83/12 | --/35 | ||
| 24V input | -- | 52/10 | --/30 | ||
| Physical Specifications | |
| Casing Material | Black flame-retardant heat resistant epoxy resin (UL94 V-0) |
| Dimensions | 15.24*11.20*7.25 mm |
| Weight | 2.0g (Typ.) |
| Cooling Method | Free air convection |
